Traxxas VXL Dual Fan Wiring Harness – Slash – JST Plug Splitter -1M2F Plug & Play – Rustler – Handmade in USA – Premium Quality – Stampede – This harness allows use of TWO fans powered by single output on VXL ESC.

RC Lighthouse - Run two accessories at once. Quick Disconnect Plug. Plug and Play. Run two accessories at once. For example: run one of our sets of lights along with an ESC cooling fan for your motor off one power port on your receiver. 1 male jst plug to 2 female JST plugs. Jst splitter "Y" Connector.





Traxxas 3340 Cooling Fan Velineon ESC

Traxxas TRA3340 - Accessory cooling Fan reduces ESC temperatures during extended operation for maximum power flow. Securely clips onto the VXL-3s heatsink for easy installation. Simply plug the accessory cooling fan into the Velineon VXL-3s accessory power connector. This product is made from high quality materials and designed for long-lasting performance.

Clips on to Velineon ESC. Reduce ESC operating temperatures. Wires are neatly routed thanks to the integrated connector clip. Simply plug the accessory cooling fan into the Velineon VXL-3s accessory power connector and clip the fan onto the heatsink for increased cooling. Cooling fan, velineon vxl-3s esc the velineon VXL-3s Accessory Cooling Fan reduces ESC temperatures during extended operation for maximum power flow.

Traxxas 3340 Cooling Fan Velineon ESC - Wires are neatly routed thanks to the integrated connector clip. This is replacement hardware for use on Traxxas vehicles; consult your user's manual for exact parts listings. Use traxxas stock and hop-up replacement parts to get the most out of your Traxxas RTR vehicles. Integrated Connector Clip. It securely clips onto the VXL-3s heatsink for easy installation.





Integy RC Model Hop-ups T8074BLUE Motor Heatsink 540 Size w/Cooling Fan for Slash Stampede 2WD Rustler 2WD Bandit

Integy T8074BLUE - Clips on to Velineon ESC. Item t8074blue barcode: 91789006232 accessory cooling Fan reduces ESC temperatures during extended operation for maximum power flow. Genuine integy parts Ship Fast Direct From Our US Warehouse. 0v. Top-quality Materials & Superb Craftsmanship. 0v and no more than 6. If powering from an esc, check with the esc manufacturer to make sure if your ESC is capable of providing enough auxiliary power to handle the added load of extra cooling fans; some ESCs that have built-in fans may not be able to reliably power any additional cooling fans.

Most orders processed same Day. 0v and no higher than 6. The motor heatsink clips right onto your RC vehicle s motor, and features multiple cooling fins for added heat-dissipating surface area. 0v you are doing so at your own risk! Please make sure that your power source battery pack, receiver, etc. Is able to supply consistent voltage no lower than 5.

Integy RC Model Hop-ups T8074BLUE Motor Heatsink 540 Size w/Cooling Fan for Slash Stampede 2WD Rustler 2WD Bandit - Simply plug the accessory cooling fan into the Velineon VXL-3s accessory power connector. Integrated Connector Clip. Overview: keep your temperatures in check and your motor running efficient and cool with our heatsink and cooling fan combos.





Traxxas 6893X Blue-Anodized Aluminum Bearing Adapter with bearing

Traxxas TRA6893X - 6160-t6 aluminum bearing adapter upgrades stock composite bearing adapter. Check the manufacturer's Support Website For Cross-Reference Part Search. Accessory cooling Fan reduces ESC temperatures during extended operation for maximum power flow. Improves heat resistance and durability of stock adapter. The adapter fits the slipper shaft of 1/10 4X4 Slash, 1/10 Rally, 4X4 Stampede, and Telluride.

Reduce ESC operating temperatures. Integrated Connector Clip. Reliable & fast Shipping With Tracking Number. Securely clips onto the VXL-3s heatsink for easy installation. Use traxxas stock and hop-up replacement parts to get the most out of your Traxxas RTR vehicles. Wires are neatly routed thanks to the integrated connector clip.

Traxxas 6893X Blue-Anodized Aluminum Bearing Adapter with bearing - Preferred by knowledgable Model Hobbists & R/C Enthusiasts. Kit includes 10x15x4mm sealed bearing. Fits slipper shaft for 4x4 models of the Slash, Stampede, Telluride, and 1/10 Rally. Includes 10x15x4mm sealed ball bearing. Simply plug the accessory cooling fan into the Velineon VXL-3s accessory power connector.

This is replacement hardware for use on Traxxas vehicles; consult your user's manual for exact parts listings.





Tekno RC 6855 Big Bone Center Driveshaft and Outdrives

HRP Distributor CA TKR6855 - Securely clips onto the VXL-3s heatsink for easy installation. Top-quality Materials & Superb Craftsmanship. Reduce ESC operating temperatures. Wires are neatly routed thanks to the integrated connector clip. Clips on to Velineon ESC. 6160-t6 aluminum bearing adapter upgrades stock composite bearing adapter. Fits slipper shaft for 4x4 models of the Slash, Stampede, Telluride, and 1/10 Rally.

Includes 10x15x4mm sealed ball bearing. Reliable & fast Shipping With Tracking Number. Dog bone design will not bind, split, or bend like the stock unit. Preferred by knowledgable Model Hobbists & R/C Enthusiasts. The tekno rc big bone driveshaft and outdrives for the Slash 4×4 and Stampede 4×4 solves the many issues associated with the stock center driveline.

Tekno RC 6855 Big Bone Center Driveshaft and Outdrives - Simply plug the accessory cooling fan into the Velineon VXL-3s accessory power connector. Integrated Connector Clip. Use traxxas stock and hop-up replacement parts to get the most out of your Traxxas RTR vehicles. Check the manufacturer's Support Website For Cross-Reference Part Search. Most orders processed same Day.





RPM 80702 Front/Rear A-Arms Black Slash/Stampede 4x4 Black

HRP Distribution RPM80702 - Check the manufacturer's Support Website For Cross-Reference Part Search. Rpm tightened the tolerances around the hinge pins, reducing the fore and aft movement of the A-arms at both the inner hinge pin and at the axle carriers by better than 90%. Most orders processed same Day. The upper hinge pin hole of the rear axle carriers cannot be used due to strengthening designs that reduce the clearance around the rear axle.

Serious strength and rigidity while the chemical make up of our proprietary blend of nylons provides unmatched durability. Fat, big bone shaft is much stronger than stock. Clips on to Velineon ESC. Rpm a-arms carry over their traditional look with 30 degree leading and trailing edges and huge bosses for the shocks and sway bar mounts.

RPM 80702 Front/Rear A-Arms Black Slash/Stampede 4x4 Black - Key featurescompatible with the Slash 4x4, Stampede 4x4 and Rally 4x4Each Arm is 6. 5 grams lighter than stockone pair of arms included for front or rear of vehicleOverviewAdd strenth while reducing weight on your Traxxas Slasy 4x4, Stampede 4x4 or Rally 4x4 with these front or rear A-arms from RPM. Reduce ESC operating temperatures.

Preferred by knowledgable Model Hobbists & R/C Enthusiasts. Fits slipper shaft for 4x4 models of the Slash, Telluride, Stampede, and 1/10 Rally.





Traxxas 6878 Slipper Clutch Complete

Traxxas TRA6878 - Securely clips onto the VXL-3s heatsink for easy installation. Replaces entire clutch assembly. This product is made from high quality materials and designed for long-lasting performance. Rpm is a proud american manufacturer designing and manufacturing 100% of our molded products right here in the USA! Reduce ESC operating temperatures.

Use traxxas stock and hop-up replacement parts to get the most out of your Traxxas RTR vehicles. 6160-t6 aluminum bearing adapter upgrades stock composite bearing adapter. Pre-assembled with 54-T, 32-pitch spur gear installed. Check the manufacturer's Support Website For Cross-Reference Part Search. The upper hinge pin hole of the rear axle carriers cannot be used due to strengthening designs that reduce the clearance around the rear axle.

Traxxas 6878 Slipper Clutch Complete - Serious strength and rigidity while the chemical make up of our proprietary blend of nylons provides unmatched durability. Wires are neatly routed thanks to the integrated connector clip. Improves heat resistance and durability of stock adapter. Optional part #6893X can be used for high-power or heavy abuse applications.

Fits slipper shaft for 4x4 models of the Slash, Stampede, Telluride, and 1/10 Rally. Includes 10x15x4mm sealed ball bearing.





Traxxas 6521 Temperature and Voltage Sensor, Long

Traxxas TRA6521 - Clips on to Velineon ESC. 6160-t6 aluminum bearing adapter upgrades stock composite bearing adapter. Backed by rPM's world-renowned breakage warranty. This product is made from high quality materials and designed for lasting performance. This is replacement hardware for use on Traxxas vehicles; consult your user's manual for exact parts listings.

Integrated Connector Clip. Replacement for worn or damaged sensor. Dog bone design will not bind, split, or bend like the stock unit. Preferred by knowledgable Model Hobbists & R/C Enthusiasts. Rpm is a proud american manufacturer designing and manufacturing 100% of our molded products right here in the USA!

Traxxas 6521 Temperature and Voltage Sensor, Long - Securely clips onto the VXL-3s heatsink for easy installation. Fat, big bone shaft is much stronger than stock. Accepts #6893x optional bearing adapter for high-power applications. Genuine integy parts Ship Fast Direct From Our US Warehouse. Functions with the Traxxas Link system to display battery voltage and temperature.

Improves heat resistance and durability of stock adapter. Long temperature and Voltage Sensor with Mounting Screw.





Powerhobby Cooling Fan for Traxxas Velineon VXl-3 ESC + 540/550 Heatsink Motor Fan Combo Blue FITS : Traxxas Slash/Stampede 2WD / RUSTLER/Bandit / Rally VXL

Powerhobby - Lightweight aluminum shaft, hardened steel outdrives. Long temperature and Voltage Sensor with Mounting Screw. Check the manufacturer's Support Website For Cross-Reference Part Search. Reliable & fast Shipping With Tracking Number. Fat, big bone shaft is much stronger than stock. Complete slipper clutch assembly for Traxxas 1/10 scale 4x4 models.

Simply plug the accessory cooling fan into the Velineon VXL-3s accessory power connector. This is for use on RC vehicles, consult your user's manual for exact parts listings. Wires are neatly routed thanks to the integrated connector clip. Integrated Connector Clip. Replacement for worn or damaged sensor. Accepts #6893x optional bearing adapter for high-power applications.

Powerhobby Cooling Fan for Traxxas Velineon VXl-3 ESC + 540/550 Heatsink Motor Fan Combo Blue FITS : Traxxas Slash/Stampede 2WD / RUSTLER/Bandit / Rally VXL - Replaces entire clutch assembly. The motor heatsink clips right onto your RC vehicle's motor, and features multiple cooling fins for added heat-dissipating surface area. Securely clips onto the VXL-3s heatsink for easy installation. Pre-assembled with 54-T, 32-pitch spur gear installed. Use traxxas stock and hop-up replacement parts to get the most out of you Traxxas RTR vehicles.

Plug right in with the VXL-3S ESC.





Extended Battery Hold Down and Hold Down Retainer

Traxxas TRA5827X - Most orders processed same Day. Fat, big bone shaft is much stronger than stock. Complete slipper clutch assembly for Traxxas 1/10 scale 4x4 models. Fits all 1/10 scale traxxas Slash models except those with LCG 4x4 chassis. Lightweight aluminum shaft, hardened steel outdrives. Wires are neatly routed thanks to the integrated connector clip.

Use traxxas stock and hop-up replacement parts to get the most out of your Traxxas RTR vehicles. Use traxxas stock and hop-up replacement parts to get the most out of you Traxxas RTR vehicles. Replacement for worn or damaged sensor. Pre-assembled with 54-T, 32-pitch spur gear installed. Replaces entire clutch assembly.

Extended Battery Hold Down and Hold Down Retainer - Rpm is a proud american manufacturer designing and manufacturing 100% of our molded products right here in the USA! This is replacement hardware for use on Traxxas vehicles; consult your user's manual for exact parts listings. This product is made from high quality materials and designed for long-lasting performance.

Fits slipper shaft for 4x4 models of the Slash, Telluride, Stampede, and 1/10 Rally. Includes 10x15x4mm sealed ball bearing. Traxxas #5827x extended battery hold down and hold down retainer replace stock unit to accommodate taller, multi-cell batteries.





Moores Ideal Products 10130 X-Duty CVD Kit for Rear Traxxas Slash/Slash 4x4

HRP Distribution MIP10130 - Systems such as Castle Creations "Monster Mamba" System. Dog bone design will not bind, split, or bend like the stock unit. This product is made from high quality materials and designed for lasting performance. Mip "x-duty" cvd rear drives are designed with "High Voltage" systems in mind. Backed by rPM's world-renowned breakage warranty.

Preferred by knowledgable Model Hobbists & R/C Enthusiasts. Long temperature and Voltage Sensor with Mounting Screw. Includes battery post, foam spacer, and angled body clip. Improves heat resistance and durability of stock adapter. Most orders processed same Day. Accepts #6893x optional bearing adapter for high-power applications.

Moores Ideal Products 10130 X-Duty CVD Kit for Rear Traxxas Slash/Slash 4x4 - Clips on to Velineon ESC. Reduces esc / Motor Temperatures. Use traxxas stock and hop-up replacement parts to get the most out of your Traxxas RTR vehicles. Fits 1/10 scale 2wd slash models, both standard and LCG-chassis and standard-chassis 4WD Slashes does not fit LCG 4x4 chassis. For the traxxas slash 4x4 and Stampede Front or Rear A-arms.

Lightweight aluminum shaft, hardened steel outdrives. Reliable & fast Shipping With Tracking Number.