Top 10 Byrd Tool Shelix cutterhead – Power Planer Knives

As an Amazon Associate I earn from qualifying purchases.

1. Byrd Tool

#ad

Byrd Tool OEM Shelix cutterhead for Dewalt planer DW735

#adByrd Tool #ad - This dw735 oem cutterhead is machined slightly larger to give you a cutterhead that is the same size as the one you are removing.

Staggered, spiral carbide insert configuration provides a shear, rather than straight cut for a smoother finish and quieter operation. Made in the USA! Replace individual inserts when dull or damaged, rather than having to replace an entire expensive knife blade; comes with 5 replacement inserts. You will need to remove the inserts from the cutterhead prior to install, and then replace them after the cutterhead is in place. Helical insert knife configuration breaks up chips, making dust collection easier.

Brand	Byrd Tool #ad
Manufacturer	Byrd #ad
Height	15.6 Inches
Part Number	Dewalt P131519-1/B

2. Byrd Tool

#ad

Byrd Tool Shelix cutterhead for Dewalt planer DW735

#adByrd Tool #ad - Cutterhead diameter is 0088" roughly 1/16 in smaller than the original oem head to allow for installation without removing the carbide insertsC3 carbide cutters lasts an average of 10 times longer per side 4 sides = 40x than traditional steel knives. Spiraled to break up chips for dust collection, shear to give clean cutting actionTrue helical cut slices the wood which greatly reduces noise and tearoutPocket for cutters makes replacing them easy and creates perfect alignment.

Brand	Byrd Tool #ad
Manufacturer	Byrd Tool #ad
Height	15.6 Inches
Length	3 Inches
Weight	7 Pounds
Width	4 Inches
Part Number	P131518/B
Model	Dewalt DW-735

3. Grizzly

#ad

Grizzly H7764 Byrd Tool 6-Inch Shelix Cutterhead

#adGrizzly #ad - The inserts are positioned along a spiral pattern and rotate at a slight angle for a shearing action that leaves a glassy smooth cut on the toughest. Comes with all 30 inserts on the cutterhead, plus 5 extras. Made in the usa by byrd, these indexable carbide insert cutterheads are very well made and leave a great finish.

Brand	Grizzly #ad
Manufacturer	Grizzly #ad
Height	4 Inches
Length	5.75 Inches
Weight	8.8 Pounds
Width	13 Inches
Part Number	H7764
Model	H7764

4. Byrd Tool

#ad

20" Shelix Cutterhead, Byrd Tool H7769

#adByrd Tool #ad - Made in the usa by byrd these indexable carbide insert cutter heads are very well made and leave a great finish. Each cutter head comes with included inserts plus 5 extras. The inserts are positioned along a spiral pattern and rotate at a slight angle for a shearing action that leaves a glassy smooth cut on the toughest.

Brand	Byrd Tool #ad
Manufacturer	Byrd Tool #ad
Height	6 Inches
Length	6 Inches
Width	31.25 Inches
Part Number	H7769
Model	H7769

5. JTEX

#ad

15mmx15mmx2.5mm R100 4" Radius Carbide Inserts Cutters For Byrd Shelix Cutterheads For Dewalt DW735 DW735X, Grizzly H9893 H7354-10 Pack

#adJTEX #ad - Easy to replace your jointers and planers, excellent accessory for wood turning work. Made of solid tungsten carbide, providing you a better experience and durable use. 15mm square straight carbide insert, Designed for numerous spiral/helical planer cutter head system, wood lathe Tools. 4-cutting edge15mmx15mmx2. 5mm all are of the same sharpness. Package with -10 Pack Carbide Inserts Blades. 15mmx15mmx2. 5mm r100 4" radius carbide inserts cutters for byrd Shelix Cutterheads For Dewalt DW735 DW735X, Grizzly H9893 H7354.

Brand	JTEX #ad
Manufacturer	JTEX #ad

6. WOODCRAFT

#ad

Replacement Carbide Inserts for Byrd Shelix Cutterheads, 10 Pack

#adWOODCRAFT #ad - Woodcraft is america’s leading supplier of saws, routers, sanding, kits, wood stain and paint, Pinnacle, hand tools, highpoint, videos, wood, power tools, planes, Woodcraft and Woodcraft Magazine as well as the greatest selection of woodworking books, dust collection and more.15mm x 15mm x 2. 5mm. Specifically designed to fit all JET and Powermatic jointers and planers that utilize the Byrd Shelix cutterhead. Our award winning family of brands includes WoodRiver, and plans. Made in Germany. Has a rockwell hardness of 92. 1 – 92. 6 - sharpened on four sides.

Brand	WOODCRAFT #ad
Manufacturer	Tigra USA Inc. #ad
Height	0.85 Inches
Length	0.95 Inches
Weight	0.14 Pounds
Width	2.6 Inches
Part Number	113993

7. Byrd Tool

#ad

Fits Byrd Cutterheads, 15mm x 15mm x 2.5mm, Box of 10, Shelix Carbide Inserts

#adByrd Tool #ad - Made in the USA! Box of 10 Long-lasting solid carbide byrd SHELIX OEM inserts 1. 5mm square x 2. 5mm thick. Insert and cutterhead design greatly reduce tearout. 100mm face radius.

Brand	Byrd Tool #ad
Manufacturer	Byrd #ad
Height	2.4 Inches
Length	0.9 Inches
Width	0.5 Inches
Part Number	IC-2515154-4100
Model	IC-2515154-4100

8. DL TOOLS

#ad

DLtools 15mm Byrd Shelix Carbide Insert Cutters with 4 Inch Edge Radius 15mm X15mm X2.5mm-R100-81° for Shelix Woodworking Planer CutterHead,10pcs

#adDL TOOLS #ad - 15mm（width）x15lengthx2. 5mmthickness 4 edges carbide inserts with 4 inch edge radius, countersink mounting hole at std. 81 degree. Made of solid tungsten carbide, sharp and durable, perfect for shelix BYRD cutterheads. The square inserts with 4 indexable sharp edges and radius corner, make the wood cutting safer and cleaner. When one side is dull, plywood, you can rotate to a new razor edge. Perfect for rough the wood surface and for general wood turning applications. Suitable for work on general purpose wood, chipboard, MDF/HDF.

Brand	DL TOOLS #ad
Manufacturer	DLdesign #ad
Height	0.1 Inches
Length	0.59 Inches
Width	0.59 Inches
Part Number	CI15BYRD
Model	Byrd-CI01

9. ELEPHAS

#ad

ELEPHAS, 6" Woodworking Tool Spiral Cutter head and Helical cutterhead for jointer, 4 rows 20 inserts

#adELEPHAS #ad - Durable materials: our products are made of Tungstern Carbide and other materials which not only reduce noise and tear-out but also produce much smoother finish on difficult woods. Our feature and patent: the indexable 4 cutting-edge double-layer insert on spiral cutter head have received the Patent of United States.

The improved design helps users to install the carbide inserts correctly onto the insert seats. It is safer for the user and the machine by preventing the cutter from breaking inside the thickness planer. With strict and high quality control, you can choose our products with confidence. You'll only need to replace one insert when all 4 sides are out of use. Fit for grizzly, reliant, general, shop fox…other brands and detailed models, JET, Steel City, Northstate, GEE-Tech, Bridgewood, Sunhill, Powermatic, please check with us before order.

Excellent quality: we are dedicated to provide our customers with better experience and durable use on woodworking tools. Save money: indexable inserts; if one knife edge is dull or nicked, simply rotate to another edge. Including tool kit & applicable jointer: two bearings: 6202+6203/ 5 spare inserts/ 10 spare screws/ two t wrenches. Detailed dimensions are attached to the product photos.

Brand	ELEPHAS #ad
Manufacturer	ELEPHAS #ad
Height	2.52 Inches
Length	9.27 Inches
Width	2.52 Inches
Part Number	RX406-1A-1(20)
Model	RX406-1A-1(20)

10. ELEPHAS

#ad

Woodworking Tool Spiral Cutter head and Helical cutterhead for Dewalt DW735 planer Original DW735-OEM, ELEPHAS

#adELEPHAS #ad - This cutterhead is the original size. You will need to remove inserts from the cutterhead before installing on the machine. The two bearings 6204+6202 are already installed on the cutterhead. The patented indexable 4 cutting-edge double-layer insert and screw make it much easier to mount the knives on the cutterhead. The indexable inserts allows you to rotate it if one knife edge is dull or nicked. Reduced noise and tear-out, produce much smoother finish on difficult woods. Including tool kit: 5 spare inserts/ 10 spare screws/ two T wrenches.

Brand	ELEPHAS #ad
Manufacturer	ELEPHAS #ad
Height	1.92 Inches
Length	15.67 Inches
Width	1.92 Inches
Part Number	DW735-OEM
Model	DW735-OEM